Molds

Custom enclosure molding

Promwad Manufacturing develops molds for enclosures. From small volume orders to large scale manufacturing, we take on projects of nearly any size or type.

We develop molds for producing plastic parts or another tooling for the production of high-quality enclosures for the electronic devices.

Enclosure injection molds at Promwad

Manufacturing molds is a complex process that helps produce enclosures and enclosure parts for electronic devices. Our goal is a ready-made enclosure that fully complies with the developed design solution.

While designing and manufacturing molds, Promwad experts perform tasks of any complexity, following the customer requirements and standards. We use only the most up-to-date software tools and equipment.

The experts of Promwad Manufacturing department have vast experience in designing and producing electronic enclosures. Our industrial designer team has been developing its portfolio for 16 years. Our primary focus is to create molds for future plastic enclosures of devices of mass consumer markets using state-of-the-art and best available technologies.

Enclosure injection molds

What we do

Analysis

Analysis

we carry out computer analysis and simulation of production processes

Materials for molds

Materials

we assist the client in choosing the best materials for the enclosure and molds

Optimization

Optimization

we optimize the enclosure design to suit the material characteristics of the mold casting

Enclosure molding maintenance

Maintenance

we support the client in the production of tooling and provide necessary consultations

Prototype

Prototyping

we create prototypes of the future enclosures close to the serial products

Manufacturing of molds at promwad

Manufacturing

help you launch mass production of enclosures at the right location in the world

Why Promwad?

Result

Result

We guarantee the declared result on the production site

Assurance

Assurance

We ensure the absence of manufacturing defects

Reliability

Reliability

High level of enclosure resistance and compliance with standards

Enclosure injection molding process

Promwad experts will manufacture molds for various production processes and materials (plastic, rubber, etc.), create and optimize their design, and test the mold to ensure the highest quality of finished products at the production site.

In a short time, designers and technologists calculate and optimize the design to test the mold to ensure the high quality of finished products in production.

To test the product for assemblability and test its usability, we make a prototype with a 3D printer. The customer receives a prototype, which is close to the final product in quality. We can find ready-made enclosure solutions for many projects.

examples of molds at promwad
Ivan Kuten

"We help our customers achieve success in industrial design. Promwad's portfolio includes devices that stand out in the world market, such as a set of Lapka iPhone sensors, portable DO-RA dosimeter-radiometers, and other products that have become popular mainly due to successful enclosure solutions. We work only with proven manufacturers in the CIS and Southeast Asia, who guarantee high quality and adherence to deadlines".

— Ivan Kuten, co-owner and CTO at Promwad

Our projects with custom enclosure molding

Digital handheld transceiver We've helped a startup to design a digital handheld transceiver for kite surfers with a built-in MP3 player

Fish finder Industrial design & new generation enclosure

Fish finder We have developed a modern industrial design and construction for the next generation fish finder

DECT base station, VolP gateway, WiFi router, Office PBX, Server
Modem 7-in-one device We have designed and prepared for mass production an advanced VoIP modem router that provides all types of office communications
selection of materials, enclosure design and structure, manufacturing of Breathalyzer
Lapka breathalyzer We have developed a breath alcohol monitor with the extreme hardness of the outer enclosure and the inner enclosure resistant to corrosion
We developed the design and structural layout of an enclosure for binoculars
Binoculars for stadiums We developed the design and enclosure for binoculars with a discrete magnification power, as well as manufactured its prototypes
development and manufacturing of access control system reader
SOFAZ ACS reader We have developed the design and structure of enclosure for an access control system reader and then put the finished product into production
promwad have designed a digital IPTV STB with DVB-T and DVB-S/S2 support, based on the SMP8654 processor by SigmaDesigns

IPTV STB with DVB-T/S/S2We have designed a digital IPTV STB with DVB-T and DVB-S/S2 support, based on the SMP8654 processor by SigmaDesigns

5D cinema hardware and software complex at the order of a company which supplies animatronics

5D video hardware+softwareWe have developed a 5D cinema hardware and software complex at the order of a company which supplies animatronics

IPTV STB design for SmartLabs
SmartLabs IPTV set-top box We have developed a range of IPTV set-top boxes, ensured license coverage for all the proprietary coding standards for audio and video
Smart home multimedia controller

Smart house controller We have designed the HDMI-CEC controller to manage a home multimedia complex: cinema, tuner, VCR and other devices

Design and development of Lapka sensors for iPhone
Lapka sensors for iPhone We have developed the enclosure design, manufactured the pilot batch and prepared for mass production a set of sensors for iPhone
The development of portable black box for an automobile
OBD-II vehicle data logger We have developed a portable automobile recorder for control and diagnostics of technical state ("black box" for an automobile)

Do you need a quote for the production of molds for your enclosure?

Drop us a line about your project! We will contact you today or the next business day. All submitted information will be kept confidential.