Solutions for
Construction
Vehicles
Embedded Systems for Construction Vehicles
- Get solutions built for demanding construction environments with real-time control systems for precise operation.
- Benefit from automotive and industrial automation expertise, integrating AI-driven safety, ISO 26262 compliance, CAN bus, AUTOSAR, and IoT connectivity.
- Work with a full-cycle engineering team to develop and integrate embedded systems with telematics, predictive maintenance, and automation.
Egor Isaev, Business Development Manager at Promwad
Optimise Every Component of Your Vehicle with Our Solutions
We develop custom software and embedded systems for construction vehicles, covering key control and monitoring functions:
Enhancing Efficiency Across the Entire Fleet
Earthmoving equipment
Excavators | Bulldozers | Backhoe loaders | Skid steer loaders | Wheel loaders
Road & surface construction
Motor graders | Pavers | Asphalt zippers | Cold planers | Road rollers
Lifting & handling equipment
Cranes (tower, mobile) | Telehandlers | Boom lifts | Scissor lifts | Forklifts
Material transport & dumping
Dump trucks | Articulated haulers | Water trucks
Specialised & heavy-duty machinery
Trenchers | Compactors | Concrete mixer trucks | Concrete pumps | Tunnel boring machines (TBM) | Drill rigs | Pile drivers | Hydraulic hammers (jackhammers)
Why We Deliver Successfully
Standard-compliant systems
We apply key standards, such as ISO 26262, ASPICE, and AUTOSAR, to ensure safety and compliance.
Industrial-grade reliability
Our designs withstand harsh environments, including dust, vibrations, and temperature extremes.
Advanced connectivity
We implement telematics, IoT, and cloud-based analytics for remote monitoring and diagnostics.
Proven expertise in harsh environments
We have 20 years of experience building solutions for off-highway, automotive, and industrial automation sectors.
Our Tech Map
RTOS
QNX | FreeRTOS | VxWorks
ADAS
AI-based collision avoidance | Object detection | Lane departure warning | Proximity sensors
Telematics & IoT
GPS tracking | Remote diagnostics | Predictive maintenance | Over-the-air (OTA) updates
AI & ML
Computer vision | Predictive analytics | Autonomous navigation | Sensor fusion
Sensor technologies
LiDAR | Radar | Ultrasonic sensors | Infrared cameras
Connectivity & Communication
CAN bus | Ethernet | LIN | Vehicle-to-Everything (V2X) | 5G/4G telematics
Camera & video systems
Multi-camera CMS | Surround view | FPGA video processing | Camera calibration & diagnostics
Functional safety & Compliance
ISO 26262 | ASPICE | IEC 61508 | AUTOSAR
Embedded hardware & Edge computing
ARM-based SoCs | FPGA | DSP | Industrial-grade microcontrollers
HMI & Display systems
TFT/LCD touchscreens | Digital instrument clusters | Customisable UI/UX
Power & Energy management
Battery Management Systems (BMS) | Power distribution units | Energy recovery systems | Custom 48V ↔ 12/24V DC/DC converters
Custom 48V Power for Non-Standard Auxiliary Loads
Construction machines are electrifying — and their auxiliary loads are anything but standard. Multi-zone HVAC, hydraulics, lifts, work lighting, and duty-cycled attachments create load profiles that off-the-shelf 48V converters simply aren't built for. As fleets move to 48V power distribution, they still need to feed 12/24V systems — a permanent dual-voltage architecture, not a temporary bridge.
Promwad designs the 48V ↔ 12/24V DC/DC power system as one stack — for OEMs, Tier-1 suppliers, and fleet electrification programmes:
Industrial-grade hardware
high-current PCB and EMI/EMC-aware layout engineered for dust, vibration, and temperature extremes from the first schematic.
Custom DC/DC topology
sized to your real duty cycles and thermal envelope, including bidirectional flow for energy recovery, where a fixed catalogue rating falls short.
Embedded firmware & diagnostics
control, on-board diagnostics, and integration with your ECUs over CAN/LIN, tied into the same telematics and predictive-maintenance stack.
Validation & compliance
ISO 19014 / ISO 13849 functional safety — with ISO 26262 where the platform is road-homologated.
Surround-View Camera Systems for Construction Machinery
Excavators, wheel loaders and haulers work with blind zones that mirrors can’t cover, in dust, mud and vibration that standard cameras aren’t built for. From 20 January 2027, the EU Machinery Regulation also expects self-propelled machines to warn the operator, or stop, when people nearby are at risk.
Promwad engineers the multi-camera system as one stack for OEMs, camera-system suppliers and Tier-1s:
Bring us the machine and its blind zones, and we’ll tell you how we’d cover them.
Our Cooperation Models
Flexible approach to suit your current needs
Time & Material
Perfect for evolving projects. You control the budget and milestones, while we ensure transparency and fast team scaling.
Dedicated Team
Your long-term engineering capacity — a self-managed, domain-focused team integrated into your workflow for steady, predictable delivery.
Fixed Price
Ideal for well-defined tasks with clear outcomes. Scope, budget, and timelines are set upfront to guarantee predictable results.
Do you want to build the future of construction vehicles together? Drop us a line!